header
4

Top Sportsman 1 Stage Nitrous Banking™ Systems Using Your Delay Box

The 1 Stage Banking System uses your Delay Box to turn Nitrous on then off. The banking unit will split the direct port systems allowing 2 hits to the tire for better control of the car and softer hit making car more controllable. The left side solenoids are wired to left output and the right side solenoids are wired to the right output.

The 1 Stage Banking System comes with:

Nitrous Arm input (positive)
Carb Switch (WOT) Input (positive)
Delay Box Activation Input (positive)
Call Back Button Turns Nitrous On at end of track (positive)
30amp Fuse Holders and Relays

Top Sportsman 2 Stage Nitrous Banking™ Systems Using
Your Delay Box
MODEL #TSB2S
- CALL FOR PRICES

The 2 Stage Banking System uses your Delay Box to turn Nitrous on then off. The banking unit will split the direct port systems allowing 4 hits to the tire for better control of the car and softer hit making car more controllable. The left side solenoids are wired to left output and the right side solenoids are wired to the right output.

The 2 Stage Banking System comes with:

Nitrous Arm input (positive)
Carb Switch (WOT) Input (positive)
2-Delay Box Activation Input (positive)
2-Call Back Button Turns Nitrous On at end of track (positive)
30amp Fuse Holders and Relays

Top Sportsman 2 Stage Nitrous Banking™ Systems Line Purge Relay
Using Your Delay Box
MODEL # TSB2FLP CALL FOR PRICES!

The 2 Stage Banking System uses your Delay Box to turn Nitrous on then off. The banking unit will split the direct port systems allowing 4 hits to the tire for better control of the car and softer hit making car more controllable. The left side solenoids are wired to left output and the right side solenoids are wired to the right output.

The 2 Stage Banking System comes with:

Nitrous Arm input (positive)
Carb Switch (WOT) Input (positive)
2-Delay Box Activation Input (positive)
2-Call Back Button Turns Nitrous On at end of track (positive)
30amp Fuse Holders and Relays

2

1-Stage 70a Part # 1SQLM $488.00

This unit is a 1 Stage time delayed activation with line purge and motor purge.

Features: Delays Stage 1 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point
The hold switch will stop the timer from restarting if you lift after the timers have activated
Built in Line and 1 Motor Purges and Nitrous Interrupt.

1

2-Stage 70a 2+1 Part # 2+1SQLM - $848.00

This unit is a 2 Stage time delayed activation with line purge and motor purge. Operates as a 2 stage with 2 timers or a 3 stage 1 on then 2 on 1 goes of then both 1 and 2 on.

Features: Delays Stage 1 and 2 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point
The hold switch will stop the timers from restarting if you lift after the timers have activated
Built in 2 Motor Purges and Nitrous Interrupt

3

3-Stage 70amp Part # 3S3QLM - $1248.00

This unit is a 3 Stage 3 timer delayed activation with 1 line purge and 3 motor purge inputs

Features: Delays Stage 1-2-3 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point
The hold switch will stop the timers from restarting if you lift after the times have activated
Built in Line Purge, 3 Motor Purges and Nitrous Interrupt

7

4-Stage 70a Part # 4S4QLM - $1368.00

This is a 4 stage 4 timer delayed activation with 4 motor purge inputs

Features: Delays Stage 1-2-3-4 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point
The hold switch will stop the timer from restarting if you lift after the timers have activated
Built in 4 Motor Purges and Nitrous Interrupt

4

3 Stage Timer 6 Pin Plug Part # 2+1T6P $538.00

Used with our older units with a 6 pin plug and operate a 2 stage like a 3 stage unit
Operates as a 3 stage with 3 timers
1 on then 2 on 1 goes off then both 1 and 2 on

Features: Delays stage 1-2-3 with 100th 10th and Seconds
Timers will pause if you lift and restarts from that point
The hold switch will stop the times from restarting if you lift after the timers have activated
This will make our older 2 stage units operate like a 3 stage

5

3-Stage 8 Pin Timer 8 Pin Timer Replacement
Part # 2+1T8P - $538.00

Used with our older units with an 8 pin timer plug and operate a 2 stage like a 3 stage unit
Operates as a 3 stage with timers
1 on then 2 on 1 goes off then both 1 and 2 on

Features: Delays stages 1-2-3 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point
The hold switch will stop the timers from restarting if you lift
after the timers have activated
Unit will make our older 2 stage units operate like a 3 stage

1 Stage 70amp Sportsman Delay On then Off Activation
Part # 1S2TP - $588.00

This is a 1 Stage 70a with 2 Delay Timers for on then off.
With Line Purge output and 1 Motor Purge that can be wired
to activate with push button at line or down the track.

Features: Delays Stage 1 on then off with
100th 10th and Seconds.
Timer will pause if you lift and restarts from that point.
"e hold switch will stop the timers from restarting if
you lift after the times have activated.
Built in Line and Motor Purge and Nitrous Interrupt.

MORE INFO TO COME!

CALL FOR DETAILS!

3 Stages and 6 Timers for Left and Right Side Activation
Part # 3S6TP - CALL FOR PRICES!

Using 6 Relays with 6 Delay Timers for the left and right side.
Making your 3 Stage System work two times for
every direct port set of solenoids. 2 line purge relay outputs and
3 motor purge input.

Features: Delays stage 1 – 2 – 3 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point.
The hold switch will stop the timers from restarting if
you lift after stage 3 timer has activated.
New switch for testing fuses and outputs in system.
Built in 3 Motor Purge plug and Nitrous Interrupt.

4 Stages and 8 Timers for Left and Right side Activation
Part # 4S8Tf - CALL FOR PRICES

Using 8 Relays and 8 Delay Timers for the left and right
side. Makes your 4 Stage System work two times for every
direct port set of solenoids with a 4 motor purge input plug.

Features: Delays Stage 1 – 2 – 3 - 4 with
100th 10th and Seconds
Timer will pause if you lift and restart from that point.
The hold switch will stop the timers from restarting if
you lift after stage 4 timer has activated.
New switch for testing fuses and outputs in system.
Built in 4 Motor Purge plug and Nitrous Interrupt.

MORE INFO TO COME!

CALL FOR DETAILS!

MORE INFO TO COME!

CALL FOR DETAILS!

Top Fuel Lean Out Timer
Part # 3STF - $598.00

Using 3 Delay Timers and 3 - 15amp relay outputs with form C normally open and normally closed relay contacts.
1 - 2 - 3 on or 1 on - 2 on 1 go’s off - 3 on 2 go’s off.

Features: Delays Stage 1 – 2 – 3 with 100th 10th and Seconds
Timer will pause if you lift and restarts from that point.
Timers won’t restart if you lift after each timer has activated.
Time can be changed at the starting line no computer needed.
Made with wires out of unit with plugs or screw terminals.

Top Fuel Lean Out Timer
Part # 4STF - $698.00

Using 4 Delay Timers and 4 - 15amp relay outputs with form C normally open and normally closed relay contacts. That allows you to wire the fuel lean out solenoids
1-2-3-4 on or 1 on-2 on 1 go’s off-3 on 2 go’s off-4 on 3 go’s off.

Features: Delays Stage 1 – 2 – 3 - 4 with
100th 10th and Seconds
Timer will pause if you lift and restarts from that point.
Timers won’t restart if you lift after each timer has activated.
Time can be changed at the starting line no computer needed.
Made with wires out of unit with plugs or screw terminals.

8

This unit will operate one stage of nitrous using 70amp relay and line purge. Unit comes with input plug for digiset timer unit that can be added any time. All battery power and input control cables are supplied with kit.(switches are not included in this kit).

1 STAGE NITROUS - LINE PURGE 70amp #1SPH $368.00

All non timer activated Nitrous Controllers can have timers added at a later date. Timer holders can be added in any way you can think of. One stage units can be on and off. Or can be on off and back on. For 2 stages units both can be timed with there own timer or both stages can be time delayed on and off as you can see (if you can think it of we can delay it).

10

This unit will operate one stage of nitrous using 70amp relay and line purge. Unit comes with digiset timer to delay activation of nitrous. All battery power and input control cables are supplied with kit.(switches are not included in this kit).

1 STAGE TIME DELAYED NITROUS - LINE PURGE 70amp #1STPH $488.00

11

ONE BUTTON ACTIVATES - 2 STAGES NITROUS - LINE LOCK - TRANS BRAKE This unit uses only one push-on control button for operation, in one complete controller. Using the same push button input you can operate your line-lock as many times as you need it. Now arm your nitrous and you can use your trans-brake as many times as you need it. The trans-brake lockout is only activated when the nitrous is armed and wide open throttle is activated (NITROUS SWITCH IS ON). Now the push button is used to activate stage two nitrous with a momentary push of the button or it can also be programmed to stay on as long as it's pushed. Stage one can be changed to stay on with stage two or be off when stage 2 is on. 2-40amp Relays are used for nitrous and all outputs are individually fused. All battery power and input control cables are supplied with kit.(switches are not included in this kit).

1B2SH ONE BUTTON NITROUS CONTROLLER with 70 amp nitrous relays $548.00

13

This unit will operate two stages of nitrous using 70amp relay and line purge. Purge button will activate stage two when stage one is on. Unit comes with plug for digiset timers that can be added any time. All battery power and input control cables are supplied with kit.(switches are not included in this kit).

2 STAGE NITROUS - LINE PURGE 70amp #2SPH $438.00

15

NEW INTERGRADED POWER SYSTEMS designed a controller that will operate two stages of nitrous using 70amp relay and line purge. Unit comes with digi-set timer to delay stage two nitrous activation. All battery power and input control cables are supplied with kit.(switches are not included in this kit).

2 STAGE TIME DELAYED NITROUS - LINE PURGE 70amp #2STDH 548.00

3

3 STAGE NITROUS TIMER ACTIVATED 70 AMP RELAYS This unit will operate three stages of nitrous using two DigiSet timers for delaying activation of nitrous that will operate stage two and three in one complete controller. Stage one can be changed to stay on with stage two or go off. Stage two can be changed to stay on with stage three or go off. Timers can be held on Thur run or will reset when you lift and reactivate. Unit comes with 3 relay output controller using 70 amp relays on all outputs. One 30 amp purge line output. Feature's diagnostic LED's for all inputs and outputs for troubleshooting. Wires are supplied for main battery power inputs, nitrous arm, wide open throttle switch and clutch switch or trans-brake nitrous interrupt. (switches are not included in this kit).

3STD-70 3 STAGE NITROUS TIME DELAYED ACTIVATION AND 70 AMP RELAY OUTPUT CONTROL UNIT $1,148.00

4
5

4 STAGE NITROUS TIMER ACTIVATED 70 AMP RELAY This unit will operate four stages of nitrous using three DigiSet timers for delaying activation of nitrous that will operate stage two, three and four in one complete controller. Stage one can be changed to stay on with stage two or go off. Stage two can be changed to stay on with stage three or go off. Stage three can be changed to stay on with stage four or go off. Timers can be held on Thur run or will reset when you lift and reactivate. Unit comes with 4 relay output controller using 70 amp relays on all outputs. Feature's diagnostic LED's for all inputs and outputs for troubleshooting. Wires are supplied for main battery power inputs, nitrous arm, wide open throttle switch and clutch switch or trans-brake nitrous interrupt. (switches are not included in this kit).

4STD-70 4 STAGE NITROUS TIME DELAYED ACTIVATION AND 70 AMP RELAY OUTPUT CONTROL UNIT $1,298.00

6
Customer acknowledges that the goods manufactured by Spaghetti Menders, Inc., are intended for competition use, and are, by their nature, constantly pushed to their limits. Accordingly, the customer waives any right they may have now, or in the future, to hold Spaghetti Menders, Inc., responsible for any structural failure result therefrom. Furthermore, customer agrees to hold harmless and indemnify Spaghetti Menders, Inc., from any action or third party claim whatsoever that may arise out of customer's use of product whether manufactured by Spaghetti Menders, Inc., or otherwise.
Contact us evenings at 815-963-1005 | fax 815-962-6876 | email us at: info@racewiring.com