New 2017

2 Stage N2O with 1 Timer $558.00

2 Stage Controller 70amp Relays with Stage 2 timer activated
motor and line purge.

Relays Switches Positive voltage to all solenoids.

Stage 1 comes on after release of trans brake and

Activation of carb switch that will start Quick Set timer

After delay stage 2 will activate.

System can be used with Progressive on first stage.

 

 

 

 

 

 

 


70 amp Relay $98.00

70amp Relay with positive or negative activation .

Relay Switches Positive voltage to load.

¼ amp relay activation great for ECU negative outputs.

 

 

 

 

 

 

 

 

 

 

 

 


ECU Operated Fuel Pump, Water Pump, Fan $198.00

You can add this unit to your system and operate your

Fuel pump, water pump and radiator fan with

Negative outputs from your ECU.

ECU input for fuel pump has Positive input from ignition

Activation so pump will shut off with ignition for safety.

ECU input for water pump and radiator fan are positive so

They stay on till ECU turns them off.

This unit can be added to any system in cable to trunk.

Optional brake light switch input for trunk relay.

Controller Manual-ECU Activated System

 

 

 


Light Under Switch Panel

You can add a Light under your switch panel

with switch on the side.

7-Bay $60.00 8 Bay $70.00 10 Bay $80.00

 

 

 

 

 

 

 

 

 

 

 

 


Mini Banking System $188.00

You can add this unit to your direct port nitrous system.

Quick Set timer and 30amp Relay for delaying one side

Of a direct port nitrous system.

This unit will delay one side so when nitrous activates

½ the system comes on after delay other side will activate.

Timer starts when main nitrous activates and

timer will activate relay to power solenoids.

Works with any 2-N2O and 2-Fuel solenoid system.

 

 

 

 

 


 

Neutral Safety without ECU Activation $98.00

You can add this unit to your system and it will isolate the

Clutch from ECU and operates starter neutral safety.

Isolated output for ECU operation with a N/O or N/C contacts.

ECU output contacts can be used positive or negative.

Switch is positive input from shifter and only uses ¼ amp.

This unit is used with Spaghetti Menders car systems.

 

 

 

 

 

 

 


Neutral Safety with ECU Activation $148.00

You can add this unit to your system and it will isolate the Clutch

from ECU and operate starter neutral safety with a 40amp relay so shifter switch is to small.

Isolated output for ECU operation with n/o and n/c contacts.

ECU output contacts can be used positive or negative.

Switch is positive input from shifter and only uses ¼ amp.

 

 

 

 

 

 

 

 

 


NORMALLY ASPIRATED

SYSTEM COMES WITH

1 – SWITCH PANEL WITH 7 SWITCHES

1 – DASH RELAY UNIT WITH 8 RELAYS

1 – TRUNK RELAY UNIT WITH 2 RELAYS

1 – 10ft & 1 – 25ft COMPUTER CABLES

ALL INPUT & MAIN POWER CABLES

FOR RELAY UNITS

$1098.00

ADDED ON OPTIONS

LED’S LIGHT UNDER SWITCH PANEL $60.00

BRAKE LIGHT RELAY OUTPUT IN TRUNK $40.00

 

 


Progressive Activating N2O with line purge $368.00

You can add this unit to your system and it will allow

Progressive units to be wired to solenoids and have

Trans brake interrupt and negative output for

Progressive activation. Fused output for line purge.

70amp Relay for Nitrous and 30amp for line purge.

Controller Manual-1 Stage Progressive Unit

 

 

 

 

 

 

 

 


Shoot Activate with Ignition Kill $168.00

You can add this unit to your system and it will activate shoot

And kill ignition with one switch input.

Unit has positive switch input when activated will operate

Shoot solenoid and if ignition kill switch is on will

Turn off ignition power from one button on wheel.

 

 

 

 

 

 

 

 

 


Trans Brake Activated Timer $198.00

You can add this unit to your system and operate shocks

Or any negative activated unit.

Trans Brake release activates timer and at end of delay

Unit activates a negative 15amp output for shocks or ECU input.

Unit uses Quickset times for 100th 10th and seconds

Unit uses a armed input so trans brake can be used to

Back up and not activate timer.

Arm power on and off will reset timer.

 

 

 

 

 


Trans Brake 2 button 4 outputs $348.00

You can add this unit to your Bump Box controller and

Activate 2 outputs from same switch inputs.

Button 1 uses a positive input and button input 2 has

form C contacts for activating bump in.

Arm unit and push button 1 trans brake is on.

Then pulse button 2 till car is staged with bump box

then release button 1 car leaves. Now button 1 and button 2

can be used to activate shoot, ignition kill, boost up and down

any thing you need to operate with a 15amp contact.

Trans brake can be used any time till the unit is armed

Then the trans is locked out till arm is turned off.

 


Trans Brake Filtered Two Step $98.00

You can add this unit to your system and it will isolate the

Trans Brake from ECU with a filtered ignition power.

Isolated output with filtered voltage for two step.

Switch is positive input from trans brake and only uses ¼ amp.

Used with digital ignitions that activate the two step with noise

from trans brake poor ground wire.

Two step output is negative and goes filtered positive voltage when trans brake is on.

 

 

 

 

 

 


Under dash fuel pump $128.00

You can add a fuel pump to the front of the car with this unit.

Unit wires into computer cable to trunk

Accessory unit can be used for fans, intercooler pumps,

fuel pumps, bottle heaters.

Controller Manual-Front Fuel Pump