Spaghetti Menders

Motor Only Turbo or Blower Nitrous Pro-Mod

Pro-Stock Monster Truck Road Racing

Nitrous Blower

ACCESSORIES

RELAYS
	# MR101	20amp Relay with 1/4" power pins (use socket # RS290)	1 @ $4.00	10 @ $30.00
	# BR301	30amp Relay with 1/4" power pins (use socket # RS281)	1 @ $4.50	10 @ $35.00
	# BR401	40amp Relay with 1/4" power pins (use socket # RS281)	1 @ $5.00	10 @ $40.00
	# PR701	70amp Relay with 3/8" power pins (use socket # RS283)	1 @ $20.00	10 @ $170.00
	# PR751	75amp Relay with large screw terminals	1 @ $28.00	10 @ $240.00
RELAY SOCKETS FOR RELAYS ABOVE
	#RS290	Micro Relay Socket with 2-3/16" & 2-1/4" Pins	1 @ $1.50	5 @ $6.50
	#RS281	40amp Relay Socket with 5-1/4" Pins	1 @ $2.50	5 @ $11.00
	#RS283	70amp Relay Socket With 2-1/4" & 2-3/8" Pins	1 @ $4.00	5 @ $21.00

	3 WIRED INPUT RELAY OUTPUT BOX	$228.00
	Using your switch or switch panel you can operate three fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.

	4 WIRED INPUT RELAY OUTPUT BOX	$248.00
	Using your switch or switch panel you can operate four fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.

	5 WIRED INPUT RELAY OUTPUT BOX	$268.00
	Using your switch or switch panel you can operate five fused outputs with 40amp relays. Feature diagnostic LED,s on all inputs and outputs. Wiring for main battery power input is supplied with system.

	1-70amp and 2-40amp RELAY OUTPUT BOX	$258.00

Trans Brake Two Step Controller Part # TBLO - $348.00

This unit is a Trans Brake Two Step Controller.
Two Step will operate independent of the Trans, Brake. Removes the flat spot on the MSD so the motor will Revs sooner on takeoff.

Features: This unit uses a solid state relay for Trans Brake.
Trans Brake locks out after run has started
2-1 amp relay outputs 1 operates when amred and 1 operates with
push button

Line Lock Lockout Clutch Activated Part # LLLO - $328.00

This unit is a Line Lock Clutch activated controller.
Line Lock will operate as normal, but when the clutch is released at the tbeginning of the run the line lock will be released and locked out even if you still have the push button on.

Features: Uses a full throttle switch so there is no reset switch
Positive output for timer start, activate at start of run
Push button can be released after full throttle